Fire Detection & Triggering Devices
Cordy-Tag®, Fire-Tag®, Trigger-Tag®, Thermo-Tag®, Rack-Ex® Its can be used on flammable and explosive hazardous areas, electric panels, machinery and electrical rooms, petrochemical Industries, warehouses, indoor spaces, tunnels, underground cable galleries etc.
Fire-Tag®
THERMAL DETECTION & AUTONOMOUS TRIGGERING DEVICE
What is Fire-Tag®?
Fire-Tag® produces the electrical current required for the extinguisher to operate when the ambient temperature rises to the target temperature.
Fire-Tag® is suitable for use with both aerosol and owder reactor type extinguishers. It is a standalone device that does not require a power supply.
Fire-Tag® has higher performance than equivalent products. The voltage it produces is not less than 25V. The current produced is sufficient to activate fire extinguishers.
How Does It Work?
When the temperature in the ambient is exceeded
specified, the liquid inside the thermal bulb expands and breaks the bulb.
The magnets on the rod released by the stretched
spring pass through the induction coil and ensure
sufficient current is generated.
Depending on the environmental characteristics,
one of the 57°C, 68°C, 79°C or 93°C thermal bulbs
can be selected.
Technicial Specifications
- Fire-Tag® is marked 2ExibIIBT4 for explosion protection. It can be used in explosion-hazardous areas.
- The protection level against environmental conditions is IP54.
- Fire-Tag® produces an electrical pulse with an amplitude of not less than 25V at a 1.6Ω load. At 25V level the pulse duration is at least 2.1ms.
- Dimensions and weight of Fire-Tag®; Height 96mm., Diameter 65mm., Weight 217g.
- Fire-Tag® operates smoothly in the temperature range of -40°C to +65°C and 98% relative humidity, depending on the type of “Thermal
Bulb” mounted on it.
Cordy-Tag®
THERMAL DETECTION & TRIGGERING DEVICE
What is Cordy-Tag®?
Cordy-Tag® cross-checks the fire alarm signal coming via two different sensors (LHD cable and/or dry contact). If a contact signal comes to both inputs at the same time, it sends 3VDC to both outputs. Fire extinguishers connected to the outputs are activated simultaneously Cordy-Tag® is suitable for use with both aerosol and powder reactor type fire
extinguishers.
Since Cordy-Tag® contains a long-lasting Li-ion battery, it does not require an external electrical source.
The DC voltage it produces is not less than 3V. The current produced is sufficient to activate fire extinguishers.
How Does It Work?
Cordy-Tag® has a 3VDC Li-ion battery with a 5-year shelf life. The status of the battery can be checked with the button on the box and 3 LEDs (green-yellow-red). If the LED is Green, the battery is sufficient. If the LED is yellow, it should be observed at short intervals and be ready to change the battery. If the LED is Red, the battery should be replaced.
When the Cordy-Tag® cover is opened, the old battery in the exposed battery compartment may be removed and replaced with a new one.
Technicial Specifications
- It is suitable for use in dirty, oily environments with its Cordy-Tag® special box.
- The protection level against environmental
conditions is IP67. - Cordy-Tag® has 2 signal inputs, 2 voltage outputs
and 2 dry contact outputs. - Dimensions and weight of Cordy-Tag®; Height
175mm., Width 130mm., Depth 42mm., Weight 250g. - Cordy-Tag® can be easily attached to the rail with
the apparatus included in the package, or it can be
mounted on flat surfaces through the bolt holes
available on the box body. - PCB is UL, RoHS and CE certified.
Thermo-Tag®
THERMAL DETECTION & TRIGGERING DEVICE FOR THE FIRE EXTINGUISHERS
What is Thermo-Tag®?
Thermo-Tag®, sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected. It can produce NO-NC output with the relay on it. The thermostat degree of the sensors on it can be selected up to 300°C depending on the environmental conditions.
Thermo-Tag® is suitable for use with both aerosol and powder reactor type fire extinguishers.
Thermo-Tag® does not require an external
electrical source.
How Does It Work?
Thermo-Tag®, sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected. It can produce NO-NC output with the relay on it. It is suitable for use in dirty, oily environments with
its special box with IP67 sealing.
PCB is UL, RoHS and CE certified.
Triggering is done with a 3VDC Li-ion battery on the card. The shelf life of the battery is 5 years.
Technicial Specifications
- Thermo-Tag® is suitable for use in dirty and oily environments with its special box.
- The protection level against environmental conditions is IP67.
- It sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected.
- Thermo-Tag® can produce NO-NC output with the relay on it.
- PCB is UL, RoHS and CE certified.
Trigger-Tag®
PROGRAMMABLE MULTI/SEQUENCE TRIGGER DEVICE FOR THE FIRE EXTINGUISHERS
What is Trigger-Tag®?
Trigger-Tag®, has been designed that can send sequentially trigger signals in the form of one alarm input and 4+1 outputs.
Trigger-Tag®, checks whether there is a load on the outputs and if there is a fault at the output, it continues to send the trigger signal to other outputs as programmed.
7 Trigger-Tag® cards can be connected in series and can be trigger 28 pcs fire extinguishing generators with only one alarm signal.
PCB is UL, RoHS and CE certified.
How Does It Work?
With a warning from the alarm panel, 24VDC-1A is able to sent to the 4 outputs connected to the card sequentially and for a desired period of time between 0.5-2 seconds. 4 aerosol or powder reactor type fire extinguishers can be connected to each Trigger-Tag®.
It is suitable for use in dirty, oily environments with its special box that has IP67 sealing and RoHS
certification.
Technicial Specifications
- Trigger-Tag® is suitable for use in dirty and oily environments with its special box.
- The protection level against environmental conditions is IP67.
- Trigger-Tag® has been designed that can send trigger signals in the form of one alarm input and 4+1 outputs.
- 7 Trigger-Tag® cards can be connected in series and can be trigger 28 pcs fire extinguishing generators with only one alarm signal.
- PCB is UL, RoHS and CE certified.